LESSON PLAN
Kevin Scheib (Wood Shop and Plastics Technology) weekly lesson plans (2/26/2012-2/30/2012)
Monday 2/26
Pd. 1,4,7 Basic Wood: Students will be working on individual projects. We will be tapering legs for tables.
Pd. 5 Advanced Cabinetmaking: Students will be working on individual projects. I will be giving a demonstration on cutting hinge gains for doors.
Pd. 2,3 Plastics Technology: Students will be working on cutting and sanding parts for the Kayak. All students must take a active part in this project in order to receive credit for the day.
Tuesday 2/27
Pd. 1,4,7 Basic Wood: Students will be working on individual projects. I will be giving a demonstration on laying out the holes for mortise and tannon joints.
Pd. 5 Advanced Cabinetmaking: Students will be working on individual projects.
Pd. 2,3 Plastics Technology: Students will continue processing parts. We will also be working on the mold injector projects at the same time so students will have a chance to make some plastic projects with this machine.
WENDNESDAY 2/28
Pd. 1,4,7 Basic Wood: I will be giving a demonstration on using the Mortis and Tennon machine.
Pd. 5 Advanced Cabinetmaking: Students will be working on individual projects.
Pd. 2,3 Plastics Technology: Students will continue processing parts. We will also be working on the mold injector projects at the same time so students will have a chance to make some plastic projects with this machine.
Thursday 2/29
Pd. 1,4,7 Basic Wood: Students will be working on individual projects. I will be going around the shop and working individually with students.
Pd. 5 Advanced Cabinetmaking: Students will be working on individual projects.
Pd. 2,3 Plastics Technology: Students will continue processing parts. We will also be working on the mold injector projects at the same time so students will have a chance to make some plastic projects with this machine.
Friday 2/30
Pd. 1,4,7 Basic Wood: Students will be working on individual projects
Pd. 5 Advanced Cabinetmaking: Students will be working on individual projects.
Pd. 2,3 Plastics Technology: We will start to assemble parts for the kayak.
FOR ALL PERIODS:
PA. Standards (Science & Technology); 2.1, 2.2, 2.3, 3.2, 3.4, 3.6,
Objectives; Wood shop-To have students fully understand process of how to use different types of measuring devices and how to measure accurately. Students will also learn safe and acceptable procedure for the shop.
Plastics- To have students fully understand process of how to use different types of measuring devices and how to measure accurately. Students will also learn safe and acceptable procedure for the shop.
Assessments; Will be done by Question and Answers and Quiz.
Monday, February 27, 2012
Tuesday, February 21, 2012
LESSON PLAN
Kevin Scheib (Wood Shop and Plastics Technology) weekly lesson plans (2/20/2012-2/24/2012)
Monday 2/20 No School For Students
Pd. 1,4,7 Basic Wood:
Pd. 5 Advanced Cabinetmaking:
Pd. 2,3 Plastics Technology:
Tuesday 2/21
Pd. 1,4,7 Basic Wood: We will do a review of projects after the time off to make sure students know what they are doing. Students will then get to work on individual projects.
Pd. 5 Advanced Cabinetmaking: Students will continue with projects.
Pd. 2,3 Plastics Technology: We will be staining the wooden parts for the chess set box.
WENDNESDAY 2/22
Pd. 1,4,7 Basic Wood: Students will be working on individual projects.
Pd. 5 Advanced Cabinetmaking: Students will continue with individual projects and I will be giving student’s assistance as needed.
Pd. 2,3 Plastics Technology: We will start to assemble Boxes and then we will continue with the kayak project. We will be able to only assemble approximately 6 boxes a day do to the limited clamps.
Thursday 2/23
Pd. 1,4,7 Basic Wood: Students will continue with individual projects.
Pd. 5 Advanced Cabinetmaking: Students will continue with individual projects.
Pd. 2,3 Plastics Technology: We will continue with the chess box assembly. And move on to the kayak project.
Friday 2/24 I will Be Out with ½ Personal Day
Pd. 1,4,7 Basic Wood: Students will continue to work on individual projects. I will be going around to each student and checking on progress.
Pd. 5 Advanced Cabinetmaking: Students will continue to work on their individual projects.
Pd. 2,3 Plastics Technology: We will continue with assembly of Boxes. We should finish them today.
FOR ALL PERIODS:
PA. Standards (Science & Technology); 2.1, 2.2, 2.3, 3.2, 3.4, 3.6,
Objectives; Wood shop-To have students fully understand process of how to use different types of measuring devices and how to measure accurately. Students will also learn safe and acceptable procedure for the shop.
Plastics- To have students fully understand process of how to use different types of measuring devices and how to measure accurately. Students will also learn safe and acceptable procedure for the shop.
Assessments; Will be done by Question and Answers and Quiz.
Kevin Scheib (Wood Shop and Plastics Technology) weekly lesson plans (2/20/2012-2/24/2012)
Monday 2/20 No School For Students
Pd. 1,4,7 Basic Wood:
Pd. 5 Advanced Cabinetmaking:
Pd. 2,3 Plastics Technology:
Tuesday 2/21
Pd. 1,4,7 Basic Wood: We will do a review of projects after the time off to make sure students know what they are doing. Students will then get to work on individual projects.
Pd. 5 Advanced Cabinetmaking: Students will continue with projects.
Pd. 2,3 Plastics Technology: We will be staining the wooden parts for the chess set box.
WENDNESDAY 2/22
Pd. 1,4,7 Basic Wood: Students will be working on individual projects.
Pd. 5 Advanced Cabinetmaking: Students will continue with individual projects and I will be giving student’s assistance as needed.
Pd. 2,3 Plastics Technology: We will start to assemble Boxes and then we will continue with the kayak project. We will be able to only assemble approximately 6 boxes a day do to the limited clamps.
Thursday 2/23
Pd. 1,4,7 Basic Wood: Students will continue with individual projects.
Pd. 5 Advanced Cabinetmaking: Students will continue with individual projects.
Pd. 2,3 Plastics Technology: We will continue with the chess box assembly. And move on to the kayak project.
Friday 2/24 I will Be Out with ½ Personal Day
Pd. 1,4,7 Basic Wood: Students will continue to work on individual projects. I will be going around to each student and checking on progress.
Pd. 5 Advanced Cabinetmaking: Students will continue to work on their individual projects.
Pd. 2,3 Plastics Technology: We will continue with assembly of Boxes. We should finish them today.
FOR ALL PERIODS:
PA. Standards (Science & Technology); 2.1, 2.2, 2.3, 3.2, 3.4, 3.6,
Objectives; Wood shop-To have students fully understand process of how to use different types of measuring devices and how to measure accurately. Students will also learn safe and acceptable procedure for the shop.
Plastics- To have students fully understand process of how to use different types of measuring devices and how to measure accurately. Students will also learn safe and acceptable procedure for the shop.
Assessments; Will be done by Question and Answers and Quiz.
Monday, February 6, 2012
LESSON PLAN
Kevin Scheib (Wood Shop and Plastics Technology) weekly lesson plans (2/6/2012-2/10/2012)
Monday 2/6
Pd. 1,4,7 Basic Wood: We will be picking lumber out and planning lumber down to size. Each student will have their own individual project.
Pd. 5 Advanced Cabinetmaking: Students will be working on the individual projects.
Pd. 2,3 Plastics Technology: We will be working on the chess boards and we will be making the wood cases for the chess set.
Tuesday 2/7
Pd. 1,4,7 Basic Wood: We will continue to hand out lumber to students and the will start to process the lumber into project parts.
Pd. 5 Advanced Cabinetmaking: Students will be working on the individual projects.
Pd. 2,3 Plastics Technology: We will continue to work on the wood box for the case . Some students will be working on making the coin purse project.
WENDNESDAY 2/8
Pd. 1,4,7 Basic Wood: Students will be working on own projects. We will still be handing lumber out to some students. Others will start processing lumber. I will be going around to each student and helping them getting started on what parts should be done.
Pd. 5 Advanced Cabinetmaking: Students are working on their own projects and I will be going around and checking progress and helping students as needed.
Pd. 2,3 Plastics Technology:
Thursday 2/9
Pd. 1,4,7 Basic Wood: Students will be working on their own projects. I will be stressing the importance of following instructions that are given with the project plans or that are given by me.
Pd. 5 Advanced Cabinetmaking: Students will be working on their own projects.
Pd. 2,3 Plastics Technology: We will be finishing up any pouring of chess pieces and students should be finish any sand blasting that is need on the chess board. We will also be working on the box for the chess boards.
Friday 2/10
Pd. 1,4,7 Basic Wood: Students should know have all the wood needed to get them started on their projects. They will be working independently unless there are more than one student making the same project. Those students may work as a group.
Pd. 5 Advanced Cabinetmaking: Students will be working on their own projects.
Pd. 2,3 Plastics Technology: We will be working on the chess board box. We will be staining the chess board boxes.
FOR ALL PERIODS:
PA. Standards (Science & Technology); 2.1, 2.2, 2.3, 3.2, 3.4, 3.6,
Objectives; Wood shop-To have students fully understand process of how to use different types of measuring devices and how to measure accurately. Students will also learn safe and acceptable procedure for the shop.
Plastics- To have students fully understand process of how to use different types of measuring devices and how to measure accurately. Students will also learn safe and acceptable procedure for the shop.
Assessments; Will be done by Question and Answers and Quiz.
Kevin Scheib (Wood Shop and Plastics Technology) weekly lesson plans (2/6/2012-2/10/2012)
Monday 2/6
Pd. 1,4,7 Basic Wood: We will be picking lumber out and planning lumber down to size. Each student will have their own individual project.
Pd. 5 Advanced Cabinetmaking: Students will be working on the individual projects.
Pd. 2,3 Plastics Technology: We will be working on the chess boards and we will be making the wood cases for the chess set.
Tuesday 2/7
Pd. 1,4,7 Basic Wood: We will continue to hand out lumber to students and the will start to process the lumber into project parts.
Pd. 5 Advanced Cabinetmaking: Students will be working on the individual projects.
Pd. 2,3 Plastics Technology: We will continue to work on the wood box for the case . Some students will be working on making the coin purse project.
WENDNESDAY 2/8
Pd. 1,4,7 Basic Wood: Students will be working on own projects. We will still be handing lumber out to some students. Others will start processing lumber. I will be going around to each student and helping them getting started on what parts should be done.
Pd. 5 Advanced Cabinetmaking: Students are working on their own projects and I will be going around and checking progress and helping students as needed.
Pd. 2,3 Plastics Technology:
Thursday 2/9
Pd. 1,4,7 Basic Wood: Students will be working on their own projects. I will be stressing the importance of following instructions that are given with the project plans or that are given by me.
Pd. 5 Advanced Cabinetmaking: Students will be working on their own projects.
Pd. 2,3 Plastics Technology: We will be finishing up any pouring of chess pieces and students should be finish any sand blasting that is need on the chess board. We will also be working on the box for the chess boards.
Friday 2/10
Pd. 1,4,7 Basic Wood: Students should know have all the wood needed to get them started on their projects. They will be working independently unless there are more than one student making the same project. Those students may work as a group.
Pd. 5 Advanced Cabinetmaking: Students will be working on their own projects.
Pd. 2,3 Plastics Technology: We will be working on the chess board box. We will be staining the chess board boxes.
FOR ALL PERIODS:
PA. Standards (Science & Technology); 2.1, 2.2, 2.3, 3.2, 3.4, 3.6,
Objectives; Wood shop-To have students fully understand process of how to use different types of measuring devices and how to measure accurately. Students will also learn safe and acceptable procedure for the shop.
Plastics- To have students fully understand process of how to use different types of measuring devices and how to measure accurately. Students will also learn safe and acceptable procedure for the shop.
Assessments; Will be done by Question and Answers and Quiz.
Monday, January 30, 2012
LESSON PLAN
Kevin Scheib (Wood Shop and Plastics Technology) weekly lesson plans (1/30/2012-2/3/2012)
Monday 1/30
Pd. 1,4,7 Basic Wood: Students will be picking individual projects out when they are done with their final coat of clear coat.
Pd. 5 Advanced Cabinetmaking: Students will be working on the individual projects.
Pd. 2,3 Plastics Technology: Students will continue to work on chess sets and some students will be working on the coin case projects.
Tuesday 1/31
Pd. 1,4,7 Basic Wood: We will be going over how to figure out the cost of their individual projects. They will be learning the formula on figuring out the board footage.
Pd. 5 Advanced Cabinetmaking: Students will be working on the individual projects.
Pd. 2,3 Plastics Technology: Students will be pouring whatever pieces they are missing. I will be giving a demonstration on layout of the chess board.
WENDNESDAY 2/1
Pd. 1,4,7 Basic Wood: Students will be figuring out the cost on their own. I will be going around and checking their math. Some will be much easier than others.
Pd. 5 Advanced Cabinetmaking: Students will be working on the individual projects.
Pd. 2,3 Plastics Technology: Students will be laying out chess board. I will then show students how to cut out the needed pieces and then how to sand blast the desired spots.
Thursday 2/2
Pd. 1,4,7 Basic Wood: We will be choosing the type of wood that the students will be using. They will choose from Red Oak. Poplar and white pine.
Pd. 5 Advanced Cabinetmaking: Students will be working on the individual projects.
Pd. 2,3 Plastics Technology: Students will be working on the chess boards.
Friday 2/3
Pd. 1,4,7 Basic Wood: We will be planning wood down as a group.
Pd. 5 Advanced Cabinetmaking: Students will be working on the individual projects.
Pd. 2,3 Plastics Technology: We will be coating all chess pieces with clear coat so they are not sticky.
FOR ALL PERIODS:
PA. Standards (Science & Technology); 2.1, 2.2, 2.3, 3.2, 3.4, 3.6,
Objectives; Wood shop-To have students fully understand process of how to use different types of measuring devices and how to measure accurately. Students will also learn safe and acceptable procedure for the shop.
Plastics- To have students fully understand process of how to use different types of measuring devices and how to measure accurately. Students will also learn safe and acceptable procedure for the shop.
Assessments; Will be done by Question and Answers and Quiz.
Kevin Scheib (Wood Shop and Plastics Technology) weekly lesson plans (1/30/2012-2/3/2012)
Monday 1/30
Pd. 1,4,7 Basic Wood: Students will be picking individual projects out when they are done with their final coat of clear coat.
Pd. 5 Advanced Cabinetmaking: Students will be working on the individual projects.
Pd. 2,3 Plastics Technology: Students will continue to work on chess sets and some students will be working on the coin case projects.
Tuesday 1/31
Pd. 1,4,7 Basic Wood: We will be going over how to figure out the cost of their individual projects. They will be learning the formula on figuring out the board footage.
Pd. 5 Advanced Cabinetmaking: Students will be working on the individual projects.
Pd. 2,3 Plastics Technology: Students will be pouring whatever pieces they are missing. I will be giving a demonstration on layout of the chess board.
WENDNESDAY 2/1
Pd. 1,4,7 Basic Wood: Students will be figuring out the cost on their own. I will be going around and checking their math. Some will be much easier than others.
Pd. 5 Advanced Cabinetmaking: Students will be working on the individual projects.
Pd. 2,3 Plastics Technology: Students will be laying out chess board. I will then show students how to cut out the needed pieces and then how to sand blast the desired spots.
Thursday 2/2
Pd. 1,4,7 Basic Wood: We will be choosing the type of wood that the students will be using. They will choose from Red Oak. Poplar and white pine.
Pd. 5 Advanced Cabinetmaking: Students will be working on the individual projects.
Pd. 2,3 Plastics Technology: Students will be working on the chess boards.
Friday 2/3
Pd. 1,4,7 Basic Wood: We will be planning wood down as a group.
Pd. 5 Advanced Cabinetmaking: Students will be working on the individual projects.
Pd. 2,3 Plastics Technology: We will be coating all chess pieces with clear coat so they are not sticky.
FOR ALL PERIODS:
PA. Standards (Science & Technology); 2.1, 2.2, 2.3, 3.2, 3.4, 3.6,
Objectives; Wood shop-To have students fully understand process of how to use different types of measuring devices and how to measure accurately. Students will also learn safe and acceptable procedure for the shop.
Plastics- To have students fully understand process of how to use different types of measuring devices and how to measure accurately. Students will also learn safe and acceptable procedure for the shop.
Assessments; Will be done by Question and Answers and Quiz.
Monday, January 23, 2012
LESSON PLAN
Kevin Scheib (Wood Shop and Plastics Technology) weekly lesson plans (1/23/2012-1/27/2012)
Monday 1/23
Pd. 1,4,7 Basic Wood: Students will be finishing the assembly of the projects. I will be giving a demonstration on staining the clock. Students may start to stain if time will allow. I would like students to start staining and be able for students to finish it.
Pd. 5 Advanced Cabinetmaking: Three students will be starting new projects. Two students will be starting to top part of the gun cabinets. One student is will be working on making the trim work for his blanket chest
Pd. 2,3 Plastics Technology: Students in the 2nd. Pd. class will continue to pore their second set of chess pieces. Students in the 3rd. pd. class will finish coating pieces and some students will be pouring their first set.
Tuesday 1/24
Pd. 1,4,7 Basic Wood: Students will be staining their clocks. This will take approximately two days to stain everyone’s clocks.
Pd. 5 Advanced Cabinetmaking: Students will continue to work on individual projects. Some students will be choosing what type of wood would be the best type of wood for what they are building. Other students will be choosing what to build while other students will continue their work on their present projects.
Pd. 2,3 Plastics Technology: Students will continue to work on the chess set projects.
WENDNESDAY 1/25
Pd. 1,4,7 Basic Wood: I will give a demonstration on clear coating of the clocks we will be using a oil base clear coat. Students will choose either a gloss finish or a Semi- gloss. They must apply three coats. They must allow 24 hours between coats.
Pd. 5 Advanced Cabinetmaking: Students will continue to work on projects. Students who are starting new projects will be figuring out the cost of the project and they will be able to see the different cost between different kinds of wood.
Pd. 2,3 Plastics Technology: Students will continue to work on the chess set projects.
Thursday 1/26
Pd. 1,4,7 Basic Wood: Students will be clear coating.
Pd. 5 Advanced Cabinetmaking: Students will continue to work on individual projects.
Pd. 2,3 Plastics Technology: We will be choosing the color of the acrylic they will be using to do their boards, And we will be cutting them to size. I will give a demonstration on how to lay out the pattern and how to cut the lines in the boards.
Friday 1/27 Act 80 Half Day
Pd. 1,4,7 Basic Wood: Students will be clear coating.
Pd. 5 Advanced Cabinetmaking: Students will continue to work on individual projects.
Pd. 2,3 Plastics Technology: I will continue with the demonstration of making the boards.
FOR ALL PERIODS:
PA. Standards (Science & Technology); 2.1, 2.2, 2.3, 3.2, 3.4, 3.6,
Objectives; Wood shop-To have students fully understand process of how to use different types of measuring devices and how to measure accurately. Students will also learn safe and acceptable procedure for the shop.
Plastics- To have students fully understand process of how to use different types of measuring devices and how to measure accurately. Students will also learn safe and acceptable procedure for the shop.
Assessments; Will be done by Question and Answers and Quiz.
Kevin Scheib (Wood Shop and Plastics Technology) weekly lesson plans (1/23/2012-1/27/2012)
Monday 1/23
Pd. 1,4,7 Basic Wood: Students will be finishing the assembly of the projects. I will be giving a demonstration on staining the clock. Students may start to stain if time will allow. I would like students to start staining and be able for students to finish it.
Pd. 5 Advanced Cabinetmaking: Three students will be starting new projects. Two students will be starting to top part of the gun cabinets. One student is will be working on making the trim work for his blanket chest
Pd. 2,3 Plastics Technology: Students in the 2nd. Pd. class will continue to pore their second set of chess pieces. Students in the 3rd. pd. class will finish coating pieces and some students will be pouring their first set.
Tuesday 1/24
Pd. 1,4,7 Basic Wood: Students will be staining their clocks. This will take approximately two days to stain everyone’s clocks.
Pd. 5 Advanced Cabinetmaking: Students will continue to work on individual projects. Some students will be choosing what type of wood would be the best type of wood for what they are building. Other students will be choosing what to build while other students will continue their work on their present projects.
Pd. 2,3 Plastics Technology: Students will continue to work on the chess set projects.
WENDNESDAY 1/25
Pd. 1,4,7 Basic Wood: I will give a demonstration on clear coating of the clocks we will be using a oil base clear coat. Students will choose either a gloss finish or a Semi- gloss. They must apply three coats. They must allow 24 hours between coats.
Pd. 5 Advanced Cabinetmaking: Students will continue to work on projects. Students who are starting new projects will be figuring out the cost of the project and they will be able to see the different cost between different kinds of wood.
Pd. 2,3 Plastics Technology: Students will continue to work on the chess set projects.
Thursday 1/26
Pd. 1,4,7 Basic Wood: Students will be clear coating.
Pd. 5 Advanced Cabinetmaking: Students will continue to work on individual projects.
Pd. 2,3 Plastics Technology: We will be choosing the color of the acrylic they will be using to do their boards, And we will be cutting them to size. I will give a demonstration on how to lay out the pattern and how to cut the lines in the boards.
Friday 1/27 Act 80 Half Day
Pd. 1,4,7 Basic Wood: Students will be clear coating.
Pd. 5 Advanced Cabinetmaking: Students will continue to work on individual projects.
Pd. 2,3 Plastics Technology: I will continue with the demonstration of making the boards.
FOR ALL PERIODS:
PA. Standards (Science & Technology); 2.1, 2.2, 2.3, 3.2, 3.4, 3.6,
Objectives; Wood shop-To have students fully understand process of how to use different types of measuring devices and how to measure accurately. Students will also learn safe and acceptable procedure for the shop.
Plastics- To have students fully understand process of how to use different types of measuring devices and how to measure accurately. Students will also learn safe and acceptable procedure for the shop.
Assessments; Will be done by Question and Answers and Quiz.
Tuesday, January 17, 2012
LESSON PLAN
Kevin Scheib (Wood Shop and Plastics Technology) weekly lesson plans (1/16/2012-1/17/2012)
Monday 1/16 No School
Pd. 1,4,7 Basic Wood:
Pd. 5 Advanced Cabinetmaking:
Pd. 2,3 Plastics Technology:
Tuesday 1/17
Pd. 1,4,7 Basic Wood: all students will be finishing any routering that still needs to be done. We will start to assemble the main frame of the clock using the air nail gun. We will then be adding the base. The top will be pre drilled and counter sunk.
Pd. 5 Advanced Cabinetmaking: Students will continue to work on individual projects. Three students are done with their first projects and will be starting their second projects.
Pd. 2,3 Plastics Technology: Students will continue to do coating while some students will be removing chess pieces from molds. Others will do doing the change purse project.
WENDNESDAY 1/18
Pd. 1,4,7 Basic Wood: We will be temporarily fastening the top so we know exactly where it will be positioned. We will be cutting the acrylic for the front. Students will be filling holes on sides with putty.
Pd. 5 Advanced Cabinetmaking: Students will continue with individual projects. Demonstrations will be given as needed on processes not yet discussed in class as they arise.
Pd. 2,3 Plastics Technology: Today’s lesson will be the same as Tuesday but some students will be pouring there first set.
Thursday 1/19
Pd. 1,4,7 Basic Wood: Students will be sanding wood putty and then I will give a demonstration on staining the clock. Students will then start to sand.
Pd. 5 Advanced Cabinetmaking: Students will continue working on individual projects. I will continue to go from student to student to help with different things with their projects.
Pd. 2,3 Plastics Technology: Students will continue to work on the chess sets and some will be doing the coin purse projects.
Friday 1/20
Pd. 1,4,7 Basic Wood: Students will continue with sanding. Most students will be finished staining today.
Pd. 5 Advanced Cabinetmaking: Students will continue to work on projects.
Pd. 2,3 Plastics Technology: Students will continue to work on the chess sets and some will be doing the coin purse projects. Some students will be removing their first poured set from molds. I would like to let poured molds set for at least two days.
FOR ALL PERIODS:
PA. Standards (Science & Technology); 2.1, 2.2, 2.3, 3.2, 3.4, 3.6,
Objectives; Wood shop-To have students fully understand process of how to use different types of measuring devices and how to measure accurately. Students will also learn safe and acceptable procedure for the shop.
Plastics- To have students fully understand process of how to use different types of measuring devices and how to measure accurately. Students will also learn safe and acceptable procedure for the shop.
Assessments; Will be done by Question and Answers and Quiz.
Kevin Scheib (Wood Shop and Plastics Technology) weekly lesson plans (1/16/2012-1/17/2012)
Monday 1/16 No School
Pd. 1,4,7 Basic Wood:
Pd. 5 Advanced Cabinetmaking:
Pd. 2,3 Plastics Technology:
Tuesday 1/17
Pd. 1,4,7 Basic Wood: all students will be finishing any routering that still needs to be done. We will start to assemble the main frame of the clock using the air nail gun. We will then be adding the base. The top will be pre drilled and counter sunk.
Pd. 5 Advanced Cabinetmaking: Students will continue to work on individual projects. Three students are done with their first projects and will be starting their second projects.
Pd. 2,3 Plastics Technology: Students will continue to do coating while some students will be removing chess pieces from molds. Others will do doing the change purse project.
WENDNESDAY 1/18
Pd. 1,4,7 Basic Wood: We will be temporarily fastening the top so we know exactly where it will be positioned. We will be cutting the acrylic for the front. Students will be filling holes on sides with putty.
Pd. 5 Advanced Cabinetmaking: Students will continue with individual projects. Demonstrations will be given as needed on processes not yet discussed in class as they arise.
Pd. 2,3 Plastics Technology: Today’s lesson will be the same as Tuesday but some students will be pouring there first set.
Thursday 1/19
Pd. 1,4,7 Basic Wood: Students will be sanding wood putty and then I will give a demonstration on staining the clock. Students will then start to sand.
Pd. 5 Advanced Cabinetmaking: Students will continue working on individual projects. I will continue to go from student to student to help with different things with their projects.
Pd. 2,3 Plastics Technology: Students will continue to work on the chess sets and some will be doing the coin purse projects.
Friday 1/20
Pd. 1,4,7 Basic Wood: Students will continue with sanding. Most students will be finished staining today.
Pd. 5 Advanced Cabinetmaking: Students will continue to work on projects.
Pd. 2,3 Plastics Technology: Students will continue to work on the chess sets and some will be doing the coin purse projects. Some students will be removing their first poured set from molds. I would like to let poured molds set for at least two days.
FOR ALL PERIODS:
PA. Standards (Science & Technology); 2.1, 2.2, 2.3, 3.2, 3.4, 3.6,
Objectives; Wood shop-To have students fully understand process of how to use different types of measuring devices and how to measure accurately. Students will also learn safe and acceptable procedure for the shop.
Plastics- To have students fully understand process of how to use different types of measuring devices and how to measure accurately. Students will also learn safe and acceptable procedure for the shop.
Assessments; Will be done by Question and Answers and Quiz.
Wednesday, December 21, 2011
LESSON PLAN
Kevin Scheib (Wood Shop and Plastics Technology) weekly lesson plans (12/19/2011 to 12/23/2011)
Monday 12/19
Pd. 1,4,7 Basic Wood: We will start to plan wood down to proper size for the clock project. We will be using Red oak. It will take approximately 2 board feet per students.
Pd. 5 Advanced Cabinetmaking: Three students will be finished assembling their coffee tables and they will start to stain. We will be assembling the main case work for one student’s book case.
Pd. 2,3 Plastics Technology: I will give a demonstration on using the engraver to make the small name plate and attaching the clip pin to the back.
Tuesday 12/20
Pd. 1,4,7 Basic Wood: I will be giving a demonstration on cutting of the individual pieces for the clock. There will be a total of six different pieces of wood for the entire clock. This will take approximately two days till all students will have all pieces cut.
Pd. 5 Advanced Cabinetmaking: Students will continue working on individual projects. They will Two students will be cutting parts for door. I will be giving a demonstration on using the shaper table. This machine will only be used by the instructor do to the safety factors. This machine takes considerable experience to safely operate.
Pd. 2,3 Plastics Technology: Students will continue to work on the small name plate project. Some students will start to work the chess set project. They will be attaching the chess pieces to the metal plate and then they will be coating with latex.
WENDNESDAY 12/21
Pd. 1,4,7 Basic Wood: Students will continue to cut pieces of wood out for the clock project.
Pd. 5 Advanced Cabinetmaking: Students will continue to work on individual projects.
Pd. 2,3 Plastics Technology: Students in the 2nd pd. will be removing their chess pieces from the latex molds. This will require the use of baby powder so that the latex does not stick to itself. I will be giving this demonstration first then students will do it. Students in the 3rd pd. will continue with the chess set project.
Thursday 12/22
Pd. 1,4,7 Basic Wood: We will be doing a complete cleaning and reorganizing of the wood shop before the holiday season. Power equipment must be cleaned and all hand tools cleaned and reorganized.
Pd. 5 Advanced Cabinetmaking: Same as 1st pd.
Pd. 2,3 Plastics Technology: Students will put one coat of latex on chess pieces and then we will do cleanup work .
Friday 12/23
Pd. 1,4,7 Basic Wood: Watch safety videos during shot class time periods.
Pd. 5 Advanced Cabinetmaking: Watch safety videos during shot class time periods.
Pd. 2,3 Plastics Technology: Watch safety videos during shot class time periods.
FOR ALL PERIODS:
PA. Standards (Science & Technology); 2.1, 2.2, 2.3, 3.2, 3.4, 3.6,
Objectives; Wood shop-To have students fully understand process of how to use different types of measuring devices and how to measure accurately. Students will also learn safe and acceptable procedure for the shop.
Plastics- To have students fully understand process of how to use different types of measuring devices and how to measure accurately. Students will also learn safe and acceptable procedure for the shop.
Assessments; Will be done by Question and Answers and Quiz.
Kevin Scheib (Wood Shop and Plastics Technology) weekly lesson plans (12/19/2011 to 12/23/2011)
Monday 12/19
Pd. 1,4,7 Basic Wood: We will start to plan wood down to proper size for the clock project. We will be using Red oak. It will take approximately 2 board feet per students.
Pd. 5 Advanced Cabinetmaking: Three students will be finished assembling their coffee tables and they will start to stain. We will be assembling the main case work for one student’s book case.
Pd. 2,3 Plastics Technology: I will give a demonstration on using the engraver to make the small name plate and attaching the clip pin to the back.
Tuesday 12/20
Pd. 1,4,7 Basic Wood: I will be giving a demonstration on cutting of the individual pieces for the clock. There will be a total of six different pieces of wood for the entire clock. This will take approximately two days till all students will have all pieces cut.
Pd. 5 Advanced Cabinetmaking: Students will continue working on individual projects. They will Two students will be cutting parts for door. I will be giving a demonstration on using the shaper table. This machine will only be used by the instructor do to the safety factors. This machine takes considerable experience to safely operate.
Pd. 2,3 Plastics Technology: Students will continue to work on the small name plate project. Some students will start to work the chess set project. They will be attaching the chess pieces to the metal plate and then they will be coating with latex.
WENDNESDAY 12/21
Pd. 1,4,7 Basic Wood: Students will continue to cut pieces of wood out for the clock project.
Pd. 5 Advanced Cabinetmaking: Students will continue to work on individual projects.
Pd. 2,3 Plastics Technology: Students in the 2nd pd. will be removing their chess pieces from the latex molds. This will require the use of baby powder so that the latex does not stick to itself. I will be giving this demonstration first then students will do it. Students in the 3rd pd. will continue with the chess set project.
Thursday 12/22
Pd. 1,4,7 Basic Wood: We will be doing a complete cleaning and reorganizing of the wood shop before the holiday season. Power equipment must be cleaned and all hand tools cleaned and reorganized.
Pd. 5 Advanced Cabinetmaking: Same as 1st pd.
Pd. 2,3 Plastics Technology: Students will put one coat of latex on chess pieces and then we will do cleanup work .
Friday 12/23
Pd. 1,4,7 Basic Wood: Watch safety videos during shot class time periods.
Pd. 5 Advanced Cabinetmaking: Watch safety videos during shot class time periods.
Pd. 2,3 Plastics Technology: Watch safety videos during shot class time periods.
FOR ALL PERIODS:
PA. Standards (Science & Technology); 2.1, 2.2, 2.3, 3.2, 3.4, 3.6,
Objectives; Wood shop-To have students fully understand process of how to use different types of measuring devices and how to measure accurately. Students will also learn safe and acceptable procedure for the shop.
Plastics- To have students fully understand process of how to use different types of measuring devices and how to measure accurately. Students will also learn safe and acceptable procedure for the shop.
Assessments; Will be done by Question and Answers and Quiz.
Subscribe to:
Posts (Atom)
