LESSON PLAN
Kevin Scheib (Wood Shop and Plastics Technology) weekly lesson plans (12/19/2011 to 12/23/2011)
Monday 12/19
Pd. 1,4,7 Basic Wood: We will start to plan wood down to proper size for the clock project. We will be using Red oak. It will take approximately 2 board feet per students.
Pd. 5 Advanced Cabinetmaking: Three students will be finished assembling their coffee tables and they will start to stain. We will be assembling the main case work for one student’s book case.
Pd. 2,3 Plastics Technology: I will give a demonstration on using the engraver to make the small name plate and attaching the clip pin to the back.
Tuesday 12/20
Pd. 1,4,7 Basic Wood: I will be giving a demonstration on cutting of the individual pieces for the clock. There will be a total of six different pieces of wood for the entire clock. This will take approximately two days till all students will have all pieces cut.
Pd. 5 Advanced Cabinetmaking: Students will continue working on individual projects. They will Two students will be cutting parts for door. I will be giving a demonstration on using the shaper table. This machine will only be used by the instructor do to the safety factors. This machine takes considerable experience to safely operate.
Pd. 2,3 Plastics Technology: Students will continue to work on the small name plate project. Some students will start to work the chess set project. They will be attaching the chess pieces to the metal plate and then they will be coating with latex.
WENDNESDAY 12/21
Pd. 1,4,7 Basic Wood: Students will continue to cut pieces of wood out for the clock project.
Pd. 5 Advanced Cabinetmaking: Students will continue to work on individual projects.
Pd. 2,3 Plastics Technology: Students in the 2nd pd. will be removing their chess pieces from the latex molds. This will require the use of baby powder so that the latex does not stick to itself. I will be giving this demonstration first then students will do it. Students in the 3rd pd. will continue with the chess set project.
Thursday 12/22
Pd. 1,4,7 Basic Wood: We will be doing a complete cleaning and reorganizing of the wood shop before the holiday season. Power equipment must be cleaned and all hand tools cleaned and reorganized.
Pd. 5 Advanced Cabinetmaking: Same as 1st pd.
Pd. 2,3 Plastics Technology: Students will put one coat of latex on chess pieces and then we will do cleanup work .
Friday 12/23
Pd. 1,4,7 Basic Wood: Watch safety videos during shot class time periods.
Pd. 5 Advanced Cabinetmaking: Watch safety videos during shot class time periods.
Pd. 2,3 Plastics Technology: Watch safety videos during shot class time periods.
FOR ALL PERIODS:
PA. Standards (Science & Technology); 2.1, 2.2, 2.3, 3.2, 3.4, 3.6,
Objectives; Wood shop-To have students fully understand process of how to use different types of measuring devices and how to measure accurately. Students will also learn safe and acceptable procedure for the shop.
Plastics- To have students fully understand process of how to use different types of measuring devices and how to measure accurately. Students will also learn safe and acceptable procedure for the shop.
Assessments; Will be done by Question and Answers and Quiz.
Wednesday, December 21, 2011
Monday, December 12, 2011
LESSON PLAN
Kevin Scheib (Wood Shop and Plastics Technology) weekly lesson plans (12/12/2011 to 12/16/2011)
Monday 12/12
Pd. 1,4,7 Basic Wood: I will give a demonstration on staining their shelf project. Students will then proceed to stain their shelves. They may choose the color of stain that they prefer. Students must following all instructions and steps as given in order to achieve a good finish.
Pd. 5 Advanced Cabinetmaking: Students will continue to work on individual projects. We will be assembling the coffee table projects today. Two students will be applying molding to the lower base cabinet of their gun cabinets. We will use the dado cutters on two other students Cabinets so we can start to assemble them.
Pd. 2,3 Plastics Technology: Period 2 will be starting the Chess set project. I will be giving a demonstration on coating the chess pieces with latex mold builder. Period 3 will be finishing up the pen holder project.
Tuesday 12/13
Pd. 1,4,7 Basic Wood: Students will continue to stain their shelves and students who have finished staining the day before will be clear coating.
Pd. 5 Advanced Cabinetmaking: Students will continue with individual projects and I will provide assistance as needed. Some students do need more assistance then others and I will be spending more time with these students.
Pd. 2,3 Plastics Technology: 2nd period will continue with coating of pieces. The 3rd period class will be given the demonstration on coating the chess pieces for the chess project.
WENDNESDAY 12/14
Pd. 1,4,7 Basic Wood: Students will continue with staining and clear coating of shelves.
Pd. 5 Advanced Cabinetmaking: Will give a demonstration on Staining. Three students will be staining their projects. Others will continue to work on projects.
Pd. 2,3 Plastics Technology: Bothe class will continue with coating of chess piece. Each student will receive a complete chess set to coat. We will be applying three coats to the chess set.
Thursday 12/15
Pd. 1,4,7 Basic Wood: Most students will be done staining and clear coating their first coat I will give a demonstration on sanding the first coat and stress to the students the importance of removing any dirt from the finish and how to properly wipe it down be for starting the third coat.
Pd. 5 Advanced Cabinetmaking: Students will continue to work on individual projects. Students who stained the day before will start to do there clear coating. They will be using and indoor/outdoor clear coat so that anything that is wet like a glass will not damage the finish.
Pd. 2,3 Plastics Technology: Students will be coating chess pieces. Some students will be finishing the pen holder project.
Friday 12/16
Pd. 1,4,7 Basic Wood: Students will be applying last coat of clear coat. We will then start to plane lumber down for the clock project. We will be using Red Oak.
Pd. 5 Advanced Cabinetmaking: Students will continue to work on individual projects.
Pd. 2,3 Plastics Technology: I will be giving a demonstration on using the Plastic Engraving Machine this will take approximately 20 minutes. When we are done some students will proceed to coat chess pieces and other students will start to do their engraving project. Students will be doing their names on the engraver. They will be aloud to chose from a variety of colors.
FOR ALL PERIODS:
PA. Standards (Science & Technology); 2.1, 2.2, 2.3, 3.2, 3.4, 3.6,
Objectives; Wood shop-To have students fully understand process of how to use different types of measuring devices and how to measure accurately. Students will also learn safe and acceptable procedure for the shop.
Plastics- To have students fully understand process of how to use different types of measuring devices and how to measure accurately. Students will also learn safe and acceptable procedure for the shop.
Assessments; Will be done by Question and Answers and Quiz.
Kevin Scheib (Wood Shop and Plastics Technology) weekly lesson plans (12/12/2011 to 12/16/2011)
Monday 12/12
Pd. 1,4,7 Basic Wood: I will give a demonstration on staining their shelf project. Students will then proceed to stain their shelves. They may choose the color of stain that they prefer. Students must following all instructions and steps as given in order to achieve a good finish.
Pd. 5 Advanced Cabinetmaking: Students will continue to work on individual projects. We will be assembling the coffee table projects today. Two students will be applying molding to the lower base cabinet of their gun cabinets. We will use the dado cutters on two other students Cabinets so we can start to assemble them.
Pd. 2,3 Plastics Technology: Period 2 will be starting the Chess set project. I will be giving a demonstration on coating the chess pieces with latex mold builder. Period 3 will be finishing up the pen holder project.
Tuesday 12/13
Pd. 1,4,7 Basic Wood: Students will continue to stain their shelves and students who have finished staining the day before will be clear coating.
Pd. 5 Advanced Cabinetmaking: Students will continue with individual projects and I will provide assistance as needed. Some students do need more assistance then others and I will be spending more time with these students.
Pd. 2,3 Plastics Technology: 2nd period will continue with coating of pieces. The 3rd period class will be given the demonstration on coating the chess pieces for the chess project.
WENDNESDAY 12/14
Pd. 1,4,7 Basic Wood: Students will continue with staining and clear coating of shelves.
Pd. 5 Advanced Cabinetmaking: Will give a demonstration on Staining. Three students will be staining their projects. Others will continue to work on projects.
Pd. 2,3 Plastics Technology: Bothe class will continue with coating of chess piece. Each student will receive a complete chess set to coat. We will be applying three coats to the chess set.
Thursday 12/15
Pd. 1,4,7 Basic Wood: Most students will be done staining and clear coating their first coat I will give a demonstration on sanding the first coat and stress to the students the importance of removing any dirt from the finish and how to properly wipe it down be for starting the third coat.
Pd. 5 Advanced Cabinetmaking: Students will continue to work on individual projects. Students who stained the day before will start to do there clear coating. They will be using and indoor/outdoor clear coat so that anything that is wet like a glass will not damage the finish.
Pd. 2,3 Plastics Technology: Students will be coating chess pieces. Some students will be finishing the pen holder project.
Friday 12/16
Pd. 1,4,7 Basic Wood: Students will be applying last coat of clear coat. We will then start to plane lumber down for the clock project. We will be using Red Oak.
Pd. 5 Advanced Cabinetmaking: Students will continue to work on individual projects.
Pd. 2,3 Plastics Technology: I will be giving a demonstration on using the Plastic Engraving Machine this will take approximately 20 minutes. When we are done some students will proceed to coat chess pieces and other students will start to do their engraving project. Students will be doing their names on the engraver. They will be aloud to chose from a variety of colors.
FOR ALL PERIODS:
PA. Standards (Science & Technology); 2.1, 2.2, 2.3, 3.2, 3.4, 3.6,
Objectives; Wood shop-To have students fully understand process of how to use different types of measuring devices and how to measure accurately. Students will also learn safe and acceptable procedure for the shop.
Plastics- To have students fully understand process of how to use different types of measuring devices and how to measure accurately. Students will also learn safe and acceptable procedure for the shop.
Assessments; Will be done by Question and Answers and Quiz.
Monday, December 5, 2011
LESSON PLAN
Kevin Scheib (Wood Shop and Plastics Technology) weekly lesson plans (12/7/2011 to 12/9/2011)
Monday 12/5
Pd. 1,4,7 Basic Wood: Students will be working on shelf projects. We will be sanding all parts and routering the edges that need to be routed.
Pd. 5 Advanced Cabinetmaking: Students will be working on individual projects. I will be giving a demonstration on using the chisel.
Pd. 2,3 Plastics Technology: Students will be working on the pen holder projects. They must have some item that can be laid flat inside the mold.
Tuesday 12/6
Pd. 1,4,7 Basic Wood: Students will be working on projects.
Pd. 5 Advanced Cabinetmaking: Students will continue to work on individual projects.
Pd. 2,3 Plastics Technology: Students will continue to work on acrylic pen holder projects.
WENDNESDAY 12/7
Pd. 1,4,7 Basic Wood: I will be giving a demonstration on assembling projects. Students will be using the air nail gun and glue to assemble. I will be working with each student during this process.
Pd. 5 Advanced Cabinetmaking: Students will continue to assemble projects.
Pd. 2,3 Plastics Technology: Students will continue to work on acrylic pen holders. They must follow all steps correctly in order for project to be finished correctly.
Thursday 12/8
Pd. 1,4,7 Basic Wood: We will continue to assemble shelf projects .
Pd. 5 Advanced Cabinetmaking: Students will continue to work on projects.
Pd. 2,3 Plastics Technology: Students should have all poured there projects by today. Most students will be sanding and buffing.
Friday 12/9
Pd. 1,4,7 Basic Wood: Students will continue to cut their project pieces to proper sizes.
Pd. 5 Advanced Cabinetmaking: Students will continue to work on projects.
Pd. 2,3 Plastics Technology: I will be giving a demonstration on drilling the hole for the pen base. Students will be doing this on the Drill press this will be a two step process. They will then add the pen holder. They must put piece of tape on the back with their name on and hand it in for a grade.
FOR ALL PERIODS:
PA. Standards (Science & Technology); 2.1, 2.2, 2.3, 3.2, 3.4, 3.6
Objectives; Wood shop-To have students fully understand process of how to use different types of measuring devices and how to measure accurately. Students will also learn safe and acceptable procedure for the shop.
Plastics- To have students fully understand process of how to use different types of measuring devices and how to measure accurately. Students will also learn safe and acceptable procedure for the shop.
Assessments; Will be done by Question and Answers and Quiz.
Kevin Scheib (Wood Shop and Plastics Technology) weekly lesson plans (12/7/2011 to 12/9/2011)
Monday 12/5
Pd. 1,4,7 Basic Wood: Students will be working on shelf projects. We will be sanding all parts and routering the edges that need to be routed.
Pd. 5 Advanced Cabinetmaking: Students will be working on individual projects. I will be giving a demonstration on using the chisel.
Pd. 2,3 Plastics Technology: Students will be working on the pen holder projects. They must have some item that can be laid flat inside the mold.
Tuesday 12/6
Pd. 1,4,7 Basic Wood: Students will be working on projects.
Pd. 5 Advanced Cabinetmaking: Students will continue to work on individual projects.
Pd. 2,3 Plastics Technology: Students will continue to work on acrylic pen holder projects.
WENDNESDAY 12/7
Pd. 1,4,7 Basic Wood: I will be giving a demonstration on assembling projects. Students will be using the air nail gun and glue to assemble. I will be working with each student during this process.
Pd. 5 Advanced Cabinetmaking: Students will continue to assemble projects.
Pd. 2,3 Plastics Technology: Students will continue to work on acrylic pen holders. They must follow all steps correctly in order for project to be finished correctly.
Thursday 12/8
Pd. 1,4,7 Basic Wood: We will continue to assemble shelf projects .
Pd. 5 Advanced Cabinetmaking: Students will continue to work on projects.
Pd. 2,3 Plastics Technology: Students should have all poured there projects by today. Most students will be sanding and buffing.
Friday 12/9
Pd. 1,4,7 Basic Wood: Students will continue to cut their project pieces to proper sizes.
Pd. 5 Advanced Cabinetmaking: Students will continue to work on projects.
Pd. 2,3 Plastics Technology: I will be giving a demonstration on drilling the hole for the pen base. Students will be doing this on the Drill press this will be a two step process. They will then add the pen holder. They must put piece of tape on the back with their name on and hand it in for a grade.
FOR ALL PERIODS:
PA. Standards (Science & Technology); 2.1, 2.2, 2.3, 3.2, 3.4, 3.6
Objectives; Wood shop-To have students fully understand process of how to use different types of measuring devices and how to measure accurately. Students will also learn safe and acceptable procedure for the shop.
Plastics- To have students fully understand process of how to use different types of measuring devices and how to measure accurately. Students will also learn safe and acceptable procedure for the shop.
Assessments; Will be done by Question and Answers and Quiz.
Subscribe to:
Posts (Atom)