LESSON PLAN
Kevin Scheib (Wood Shop and Plastics Technology) weekly lesson plans (11/28/2011 to 12/2/2011)
Monday 11/29 NO SCHOOL
Pd. 1,4,7 Basic Wood:
Pd. 5 Advanced Cabinetmaking:
Pd. 2,3 Plastics Technology:
Tuesday 11/30
Pd. 1,4,7 Basic Wood: We will be starting our next project. Students will be planning lumber down to size for the shelf. The shelf will be made of white pine. Some students will be finishing up their bench projects.
Pd. 5 Advanced Cabinetmaking: Students will continue to work on individual projects and I will give a demonstration on gluing and assembling of the dove tail chest that a student is building.
Pd. 2,3 Plastics Technology: Students will continue to work on acrylic paper pour projects.
WENDNESDAY 11/30
Pd. 1,4,7 Basic Wood: We will continue with the planning of lumber and we will then start to cut to rough lengths so that each student will have their own pieces of wood.
Pd. 5 Advanced Cabinetmaking: Students will continue to assemble projects. I will be working with two students to assemble coffee tables.
Pd. 2,3 Plastics Technology: Students will continue to work on acrylic paper pour projects.
Thursday 12/1
Pd. 1,4,7 Basic Wood: I will give a review demonstration on the process of cutting the boards to the proper widths and to the finished lengths.
Pd. 5 Advanced Cabinetmaking: Students will continue to work on projects.
Pd. 2,3 Plastics Technology: Students will continue to work on acrylic paper pour projects.
Friday 12/2
Pd. 1,4,7 Basic Wood: Students will continue to cut their project pieces to proper sizes.
Pd. 5 Advanced Cabinetmaking: Students will continue to work on projects.
Pd. 2,3 Plastics Technology: Students will be finishing their 1st acrylic pour project. I will be giving a demonstration on the next project which will be the Pen holder.
FOR ALL PERIODS:
PA. Standards (Science & Technology); 2.1, 2.2, 2.3, 3.2, 3.4, 3.6
Objectives; Wood shop-To have students fully understand process of how to use different types of measuring devices and how to measure accurately. Students will also learn safe and acceptable procedure for the shop.
Plastics- To have students fully understand process of how to use different types of measuring devices and how to measure accurately. Students will also learn safe and acceptable procedure for the shop.
Assessments; Will be done by Question and Answers and Quiz.
Tuesday, November 29, 2011
Monday, November 21, 2011
LESSON PLAN
Kevin Scheib (Wood Shop and Plastics Technology) weekly lesson plans (11/21/2011 to 11/25/2011)
Monday 11/21
Pd. 1,4,7 Basic Wood: Students will be clear coating benches. They will be able to put second and third coats on and take them home Tuesday.
Pd. 5 Advanced Cabinetmaking: Students will be working on projects. Some students will be assembling. I will demonstrate assembling the dove tail chest.
Pd. 2,3 Plastics Technology: We will be pouring the acrylic projects. Some students will be sanding and then start to buff.
Tuesday 11/22
Pd. 1,4,7 Basic Wood: Students will continue with clear coating. Some students will be taking the benches home after grading.
Pd. 5 Advanced Cabinetmaking: Students will continue to work on projects.
Pd. 2,3 Plastics Technology: Students will continue with the acrylic project.
WENDNESDAY 11/23 1 /2 DAY Clean UP DAY
Pd. 1,4,7 Basic Wood: CLEAN THE SHOP
Pd. 5 Advanced Cabinetmaking: CLEAN THE SHOP
Pd. 2,3 Plastics Technology: CLEAN THE SHOP
Thursday 11/24 NO SCHOOL
Pd. 1,4,7 Basic Wood:
Pd. 5 Advanced Cabinetmaking:
Pd. 2,3 Plastics Technology: Students
Friday 11/25 NO SCHOOL
Pd. 1,4,7 Basic Wood:
Pd. 5 Advanced Cabinetmaking:
Pd. 2,3 Plastics Technology:
FOR ALL PERIODS:
PA. Standards (Science & Technology); 2.1, 2.2, 2.3, 3.2, 3.4, 3.6
Objectives; Wood shop-To have students fully understand process of how to use different types of measuring devices and how to measure accurately. Students will also learn safe and acceptable procedure for the shop.
Plastics- To have students fully understand process of how to use different types of measuring devices and how to measure accurately. Students will also learn safe and acceptable procedure for the shop.
Assessments; Will be done by Question and Answers and Quiz.
Kevin Scheib (Wood Shop and Plastics Technology) weekly lesson plans (11/21/2011 to 11/25/2011)
Monday 11/21
Pd. 1,4,7 Basic Wood: Students will be clear coating benches. They will be able to put second and third coats on and take them home Tuesday.
Pd. 5 Advanced Cabinetmaking: Students will be working on projects. Some students will be assembling. I will demonstrate assembling the dove tail chest.
Pd. 2,3 Plastics Technology: We will be pouring the acrylic projects. Some students will be sanding and then start to buff.
Tuesday 11/22
Pd. 1,4,7 Basic Wood: Students will continue with clear coating. Some students will be taking the benches home after grading.
Pd. 5 Advanced Cabinetmaking: Students will continue to work on projects.
Pd. 2,3 Plastics Technology: Students will continue with the acrylic project.
WENDNESDAY 11/23 1 /2 DAY Clean UP DAY
Pd. 1,4,7 Basic Wood: CLEAN THE SHOP
Pd. 5 Advanced Cabinetmaking: CLEAN THE SHOP
Pd. 2,3 Plastics Technology: CLEAN THE SHOP
Thursday 11/24 NO SCHOOL
Pd. 1,4,7 Basic Wood:
Pd. 5 Advanced Cabinetmaking:
Pd. 2,3 Plastics Technology: Students
Friday 11/25 NO SCHOOL
Pd. 1,4,7 Basic Wood:
Pd. 5 Advanced Cabinetmaking:
Pd. 2,3 Plastics Technology:
FOR ALL PERIODS:
PA. Standards (Science & Technology); 2.1, 2.2, 2.3, 3.2, 3.4, 3.6
Objectives; Wood shop-To have students fully understand process of how to use different types of measuring devices and how to measure accurately. Students will also learn safe and acceptable procedure for the shop.
Plastics- To have students fully understand process of how to use different types of measuring devices and how to measure accurately. Students will also learn safe and acceptable procedure for the shop.
Assessments; Will be done by Question and Answers and Quiz.
Tuesday, November 15, 2011
LESSON PLAN
Kevin Scheib (Wood Shop and Plastics Technology) weekly lesson plans (11/14/2011 to 11/18/2011)
Monday 11/14
Pd. 1,4,7 Basic Wood: I will be giving a demonstration on assembling the stool. We will be using the air nail gun and the electric drills.
Pd. 5 Advanced Cabinetmaking: I will be giving a demonstration on using the Dove Tail Jigs This will take most of the time of class. If any time is left students will be able to work.
Pd. 2,3 Plastics Technology: Students will be finishing up any buffing to be done on the mugs. We will finish applying the handles to the mugs.
Tuesday 11/15
Pd. 1,4,7 Basic Wood: We will be assembling Benches. I will be giving a demonstration cutting plugs and filling the nail holes and screw holes.
Pd. 5 Advanced Cabinetmaking: Students will continue to work on projects.
Pd. 2,3 Plastics Technology: I will be giving a demonstration on cutting out stencils to apply to the mugs and the use of the sand blaster. Students will be adding designs to the mugs.
WENDNESDAY 11/16
Pd. 1,4,7 Basic Wood: Students will continue to assemble benches and fill holes. I will be giving a demonstration on using the plug cutting saw and how to sand the plugs down.
Pd. 5 Advanced Cabinetmaking: Some students will be assembling some parts of their projects. They will continue to work on projects.
Pd. 2,3 Plastics Technology: We will continue with the adding of designs to the mugs.
Thursday 11/17
Pd. 1,4,7 Basic Wood: Students will continue to work on benches.
Pd. 5 Advanced Cabinetmaking: Students will continue to work on projects. I will give a demonstration on assembling the Blanket chest that we cut dove tails into. This will take a sometime and help will be required by other students.
Pd. 2,3 Plastics Technology: Students will be finishing the Sand blasting process.
Friday 11/18
Pd. 1,4,7 Basic Wood: I will be giving a demonstration on Staining benches and students will start to stain.
Pd. 5 Advanced Cabinetmaking: I will be giving a demonstration on using the biscuit cutter to put three students’ table tops together.
Pd. 2,3 Plastics Technology: I will be giving a demonstration on the next project which will be Pouring of resin to make the paper weight.
FOR ALL PERIODS:
PA. Standards (Science & Technology); 2.1, 2.2, 2.3, 3.2, 3.4, 3.6
Objectives; Wood shop-To have students fully understand process of how to use different types of measuring devices and how to measure accurately. Students will also learn safe and acceptable procedure for the shop.
Plastics- To have students fully understand process of how to use different types of measuring devices and how to measure accurately. Students will also learn safe and acceptable procedure for the shop.
Assessments; Will be done by Question and Answers and Quiz.
Kevin Scheib (Wood Shop and Plastics Technology) weekly lesson plans (11/14/2011 to 11/18/2011)
Monday 11/14
Pd. 1,4,7 Basic Wood: I will be giving a demonstration on assembling the stool. We will be using the air nail gun and the electric drills.
Pd. 5 Advanced Cabinetmaking: I will be giving a demonstration on using the Dove Tail Jigs This will take most of the time of class. If any time is left students will be able to work.
Pd. 2,3 Plastics Technology: Students will be finishing up any buffing to be done on the mugs. We will finish applying the handles to the mugs.
Tuesday 11/15
Pd. 1,4,7 Basic Wood: We will be assembling Benches. I will be giving a demonstration cutting plugs and filling the nail holes and screw holes.
Pd. 5 Advanced Cabinetmaking: Students will continue to work on projects.
Pd. 2,3 Plastics Technology: I will be giving a demonstration on cutting out stencils to apply to the mugs and the use of the sand blaster. Students will be adding designs to the mugs.
WENDNESDAY 11/16
Pd. 1,4,7 Basic Wood: Students will continue to assemble benches and fill holes. I will be giving a demonstration on using the plug cutting saw and how to sand the plugs down.
Pd. 5 Advanced Cabinetmaking: Some students will be assembling some parts of their projects. They will continue to work on projects.
Pd. 2,3 Plastics Technology: We will continue with the adding of designs to the mugs.
Thursday 11/17
Pd. 1,4,7 Basic Wood: Students will continue to work on benches.
Pd. 5 Advanced Cabinetmaking: Students will continue to work on projects. I will give a demonstration on assembling the Blanket chest that we cut dove tails into. This will take a sometime and help will be required by other students.
Pd. 2,3 Plastics Technology: Students will be finishing the Sand blasting process.
Friday 11/18
Pd. 1,4,7 Basic Wood: I will be giving a demonstration on Staining benches and students will start to stain.
Pd. 5 Advanced Cabinetmaking: I will be giving a demonstration on using the biscuit cutter to put three students’ table tops together.
Pd. 2,3 Plastics Technology: I will be giving a demonstration on the next project which will be Pouring of resin to make the paper weight.
FOR ALL PERIODS:
PA. Standards (Science & Technology); 2.1, 2.2, 2.3, 3.2, 3.4, 3.6
Objectives; Wood shop-To have students fully understand process of how to use different types of measuring devices and how to measure accurately. Students will also learn safe and acceptable procedure for the shop.
Plastics- To have students fully understand process of how to use different types of measuring devices and how to measure accurately. Students will also learn safe and acceptable procedure for the shop.
Assessments; Will be done by Question and Answers and Quiz.
Monday, November 7, 2011
LESSON PLAN
Kevin Scheib (Wood Shop and Plastics Technology) weekly lesson plans (11/7/2011 to 11/11/2011)
Monday 11/7
Pd. 1,4,7 Basic Wood: Students will continue the sanding of the project pieces and cutting the angle on the middle brace piece.
Pd. 5 Advanced Cabinetmaking: I will be giving a demonstration on using the Dado blades on the tale saw to cut Dado joints in two students project pieces.
Pd. 2,3 Plastics Technology: I will be giving the demonstration on getting The Mug project started. We will be cutting a piece of clear acrylic for the bottom of the mug. I will be give demonstration on how to glue it in position.
Tuesday 11/8
Pd. 1,4,7 Basic Wood: We will start to plan lumber down to make the top of the benches. We will be gluing the boards together to achieve the proper width.
Pd. 5 Advanced Cabinetmaking: Students will be working on projects. I will be giving a demonstration on assembling the lower cabinet of a gun cabinet.
Pd. 2,3 Plastics Technology: Students will be working on glue it in position if they did not get to it on Monday. I will be giving a demonstration on how to sand the edges of the bottom down to the proper side and how to use the hand sanders.
WENDNESDAY 11/9
Pd. 1,4,7 Basic Wood: I will be giving a demonstration on gluing the boards together for the proper width. We will then start to glue. All students will be helping with this so they have a full understanding of the process.
Pd. 5 Advanced Cabinetmaking: I will be giving a demonstration on using the Dove tail cutters. We will be using them on a large blanket chest.
Pd. 2,3 Plastics Technology: Students will be sanding the bottom to proper size. I will give demonstration on buffing it to finish the bottom. Students will be receiving the acrylic rod for the handle.
Thursday 11/10
Pd. 1,4,7 Basic Wood: We will be cutting boards to a rough measurement and then each student will be planning their own board done to the proper thickness of ¾”. They will then run the board through the jointer and then the table saw to achieve the proper width. They will then cut to the proper length and make sure it is square.
Pd. 5 Advanced Cabinetmaking: Students will continue to work on projects
Pd. 2,3 Plastics Technology: Students will be finishing the sanding and the buffing of the bottom of the mug.
Friday 11/11 No School for Students Act 80 Day In Service
Pd. 1,4,7 Basic Wood:
Pd. 5 Advanced Cabinetmaking:
Pd. 2,3 Plastics Technology:
FOR ALL PERIODS:
PA. Standards (Science & Technology); 2.1, 2.2, 2.3, 3.2, 3.4, 3.6
Objectives; Wood shop-To have students fully understand process of how to use different types of measuring devices and how to measure accurately. Students will also learn safe and acceptable procedure for the shop.
Plastics- To have students fully understand process of how to use different types of measuring devices and how to measure accurately. Students will also learn safe and acceptable procedure for the shop.
Assessments; Will be done by Question and Answers and Quiz.
Kevin Scheib (Wood Shop and Plastics Technology) weekly lesson plans (11/7/2011 to 11/11/2011)
Monday 11/7
Pd. 1,4,7 Basic Wood: Students will continue the sanding of the project pieces and cutting the angle on the middle brace piece.
Pd. 5 Advanced Cabinetmaking: I will be giving a demonstration on using the Dado blades on the tale saw to cut Dado joints in two students project pieces.
Pd. 2,3 Plastics Technology: I will be giving the demonstration on getting The Mug project started. We will be cutting a piece of clear acrylic for the bottom of the mug. I will be give demonstration on how to glue it in position.
Tuesday 11/8
Pd. 1,4,7 Basic Wood: We will start to plan lumber down to make the top of the benches. We will be gluing the boards together to achieve the proper width.
Pd. 5 Advanced Cabinetmaking: Students will be working on projects. I will be giving a demonstration on assembling the lower cabinet of a gun cabinet.
Pd. 2,3 Plastics Technology: Students will be working on glue it in position if they did not get to it on Monday. I will be giving a demonstration on how to sand the edges of the bottom down to the proper side and how to use the hand sanders.
WENDNESDAY 11/9
Pd. 1,4,7 Basic Wood: I will be giving a demonstration on gluing the boards together for the proper width. We will then start to glue. All students will be helping with this so they have a full understanding of the process.
Pd. 5 Advanced Cabinetmaking: I will be giving a demonstration on using the Dove tail cutters. We will be using them on a large blanket chest.
Pd. 2,3 Plastics Technology: Students will be sanding the bottom to proper size. I will give demonstration on buffing it to finish the bottom. Students will be receiving the acrylic rod for the handle.
Thursday 11/10
Pd. 1,4,7 Basic Wood: We will be cutting boards to a rough measurement and then each student will be planning their own board done to the proper thickness of ¾”. They will then run the board through the jointer and then the table saw to achieve the proper width. They will then cut to the proper length and make sure it is square.
Pd. 5 Advanced Cabinetmaking: Students will continue to work on projects
Pd. 2,3 Plastics Technology: Students will be finishing the sanding and the buffing of the bottom of the mug.
Friday 11/11 No School for Students Act 80 Day In Service
Pd. 1,4,7 Basic Wood:
Pd. 5 Advanced Cabinetmaking:
Pd. 2,3 Plastics Technology:
FOR ALL PERIODS:
PA. Standards (Science & Technology); 2.1, 2.2, 2.3, 3.2, 3.4, 3.6
Objectives; Wood shop-To have students fully understand process of how to use different types of measuring devices and how to measure accurately. Students will also learn safe and acceptable procedure for the shop.
Plastics- To have students fully understand process of how to use different types of measuring devices and how to measure accurately. Students will also learn safe and acceptable procedure for the shop.
Assessments; Will be done by Question and Answers and Quiz.
Subscribe to:
Posts (Atom)