LESSON PLAN
Kevin Scheib (Wood Shop and Plastics Technology) weekly lesson plans (10/31/2011 to 11/4/2011)
Monday 10/31 *Due to repairs on a pipe in the wood shop we will be out of the shop on Monday or Tuesday. We will be over in the Power Tech room or the Health Room*
Pd. 1,4,7 Basic Wood: I will be giving a demonstration on Laying out of the angles to be cut on the bench ends. They will also be tracing the radius on the bottom edge of pieces. I will then give a demonstration on using the Band saw to cut the project pieces out. We will be using three different Band Saws. Students may choose which one they are more comfortable using.
Pd. 5 Advanced Cabinetmaking: I will give a demonstration using the Power Miter Saw to the advanced class and the test will be given the following Day.
Pd. 2,3 Plastics Technology: Students will continue with the desk organizer project. They will be gluing together. After 24 hours they will be sanding using three different grits of sand paper.
Tuesday 11/1
Pd. 1,4,7 Basic Wood: Students will continue to cut project pieces out.
Pd. 5 Advanced Cabinetmaking: Test will be given on the power miter saw. Students will continue to work on individual projects. As students get to different processes with project part construction I will be give group demonstrations’.
Pd. 2,3 Plastics Technology: I will give a demonstration on buffing the project. There is a specific order to follow in buffing this project.
WENDNESDAY 11/2
Pd. 1,4,7 Basic Wood: Students will continue to cut project pieces out. I will also be giving a sanding demonstration using the disk sander and the vertical sander.
Pd. 5 Advanced Cabinetmaking: Students will continue to work on projects.
Pd. 2,3 Plastics Technology: Students will continue to work on the desk organizer project.
Thursday 11/3
Pd. 1,4,7 Basic Wood: Students will be sanding using the disc sander and the vertical sander.
Pd. 5 Advanced Cabinetmaking: Students will continue to work on projects
Pd. 2,3 Plastics Technology: Students will be finishing the desk organizer today. If there is enough time left in the class period we will be starting the next project which will be the acrylic mug.
Friday 11/4
Pd. 1,4,7 Basic Wood: I will give a demonstration on cutting the center brace for the bench the students will be using the power cut off saw. Students will be given a study sheet for the power cut off saw and then the following day will be given a quiz on the piece of equipment. They must pass the test before they may use it.
Pd. 5 Advanced Cabinetmaking: Students will continue t6o work on projects. I will be helping students with all processes as the work on projects.
Pd. 2,3 Plastics Technology: If demonstration was not given on Thursday on making the acrylic mug this will be done today. This demonstration will be done in two parts. The first part will be sanding the ends of the acrylic tube. We will then choose the color for the bottom. I will then demon straight how students will cut the bottom out and glue it to one end of the tube.
FOR ALL PERIODS:
PA. Standards (Science & Technology); 2.1, 2.2, 2.3, 3.2, 3.4, 3.6
Objectives; Wood shop-To have students fully understand process of how to use different types of measuring devices and how to measure accurately. Students will also learn safe and acceptable procedure for the shop.
Plastics- To have students fully understand process of how to use different types of measuring devices and how to measure accurately. Students will also learn safe and acceptable procedure for the shop.
Assessments; Will be done by Question and Answers and Quiz.
Monday, October 31, 2011
Monday, October 17, 2011
LESSON PLAN
Kevin Scheib (Wood Shop and Plastics Technology) weekly lesson plans (10/17/2011 to 10/21/2011)
Monday 10/17
Pd. 1,4,7 Basic Wood: Students will be working on working on the Router project with the Plunge Router. They will be doing their name or a sports team only.
Pd. 5 Advanced Cabinetmaking: Students are in the process of planning lumber down and getting wood ready to glue together. Students will continue with gluing
Pd. 2,3 Plastics Technology: We will be cutting the plug for the end. I will be giving a demonstration on drilling the small holes in the end for salt and pepper to come out.
Tuesday 10/18
Pd. 1,4,7 Basic Wood: Students will continue with Plunge Router project and sanding . They will also router all the edges on the router table. I will also be giving a demonstration on staining and explaining the differences between Paint and Stain. The differences between some stains.
Pd. 5 Advanced Cabinetmaking: Students will continue to plane and cut lumber down for projects. I will give a review demonstration cutting a project piece down to the exact size and making sure that it is perfectly square.
Pd. 2,3 Plastics Technology: Students will continue to drill small holes we will finish cutting the plugs for the large hole.
WENDNESDAY 10/19
Pd. 1,4,7 Basic Wood: Some students will be finishing up on the plunge router. Other students will be starting to stain. They will be staining both router projects.
Pd. 5 Advanced Cabinetmaking: Students will continue to work on projects. I will be around to each student to inspect their progress and to make sure they are not making any major mistakes.
Pd. 2,3 Plastics Technology: Students will be finishing up any buffing and polishing and I will be grading their projects. Students will bring them up one by one so we can talk about the problems thy may have had doing this project.
Thursday 10/20
Pd. 1,4,7 Basic Wood: Students will continue with staining. This will take two days to finish.
Pd. 5 Advanced Cabinetmaking: Students will continue to cut projects to finish sizes. I will give a demonstration on sanding. We will talk about going through a progression of steps to achieve the best quality finish.
Pd. 2,3 Plastics Technology: I will be finishing grading first. I will then start a demonstration on making a desk organizer out of acrylic. We will be gluing pieces together using the squeeze bottles. This demonstration will take most of the period.
Friday 10/21
Pd. 1,4,7 Basic Wood: Students will finish staining. Students who were done staining before today will be painting the inside of the letters if they choose.
Pd. 5 Advanced Cabinetmaking: I will be giving a demonstration of different types of joints that are used in cabinet construction I will start out with the Dado Joints. I will be showing how they are cut using the table saw.
Pd. 2,3 Plastics Technology: Students will be working on the desk organizer project this will take approximately there days till all students are done.
FOR ALL PERIODS:
PA. Standards (Science & Technology); 2.1, 2.2, 2.3, 3.2, 3.4, 3.6
Objectives; Wood shop-To have students fully understand process of how to use different types of measuring devices and how to measure accurately. Students will also learn safe and acceptable procedure for the shop.
Plastics- To have students fully understand process of how to use different types of measuring devices and how to measure accurately. Students will also learn safe and acceptable procedure for the shop.
Assessments; Will be done by Question and Answers and Quiz.
Kevin Scheib (Wood Shop and Plastics Technology) weekly lesson plans (10/17/2011 to 10/21/2011)
Monday 10/17
Pd. 1,4,7 Basic Wood: Students will be working on working on the Router project with the Plunge Router. They will be doing their name or a sports team only.
Pd. 5 Advanced Cabinetmaking: Students are in the process of planning lumber down and getting wood ready to glue together. Students will continue with gluing
Pd. 2,3 Plastics Technology: We will be cutting the plug for the end. I will be giving a demonstration on drilling the small holes in the end for salt and pepper to come out.
Tuesday 10/18
Pd. 1,4,7 Basic Wood: Students will continue with Plunge Router project and sanding . They will also router all the edges on the router table. I will also be giving a demonstration on staining and explaining the differences between Paint and Stain. The differences between some stains.
Pd. 5 Advanced Cabinetmaking: Students will continue to plane and cut lumber down for projects. I will give a review demonstration cutting a project piece down to the exact size and making sure that it is perfectly square.
Pd. 2,3 Plastics Technology: Students will continue to drill small holes we will finish cutting the plugs for the large hole.
WENDNESDAY 10/19
Pd. 1,4,7 Basic Wood: Some students will be finishing up on the plunge router. Other students will be starting to stain. They will be staining both router projects.
Pd. 5 Advanced Cabinetmaking: Students will continue to work on projects. I will be around to each student to inspect their progress and to make sure they are not making any major mistakes.
Pd. 2,3 Plastics Technology: Students will be finishing up any buffing and polishing and I will be grading their projects. Students will bring them up one by one so we can talk about the problems thy may have had doing this project.
Thursday 10/20
Pd. 1,4,7 Basic Wood: Students will continue with staining. This will take two days to finish.
Pd. 5 Advanced Cabinetmaking: Students will continue to cut projects to finish sizes. I will give a demonstration on sanding. We will talk about going through a progression of steps to achieve the best quality finish.
Pd. 2,3 Plastics Technology: I will be finishing grading first. I will then start a demonstration on making a desk organizer out of acrylic. We will be gluing pieces together using the squeeze bottles. This demonstration will take most of the period.
Friday 10/21
Pd. 1,4,7 Basic Wood: Students will finish staining. Students who were done staining before today will be painting the inside of the letters if they choose.
Pd. 5 Advanced Cabinetmaking: I will be giving a demonstration of different types of joints that are used in cabinet construction I will start out with the Dado Joints. I will be showing how they are cut using the table saw.
Pd. 2,3 Plastics Technology: Students will be working on the desk organizer project this will take approximately there days till all students are done.
FOR ALL PERIODS:
PA. Standards (Science & Technology); 2.1, 2.2, 2.3, 3.2, 3.4, 3.6
Objectives; Wood shop-To have students fully understand process of how to use different types of measuring devices and how to measure accurately. Students will also learn safe and acceptable procedure for the shop.
Plastics- To have students fully understand process of how to use different types of measuring devices and how to measure accurately. Students will also learn safe and acceptable procedure for the shop.
Assessments; Will be done by Question and Answers and Quiz.
Monday, October 10, 2011
LESSON PLAN
Kevin Scheib (Wood Shop and Plastics Technology) weekly lesson plans (10/10/2011 to 10/14/2011)
Monday 10/10
Pd. 1,4,7 Basic Wood: Students will be finishing the Free Hand routering project. We will also be planeing lumber down For our next router project. This will take the whole period. We will be using Poplar.
Pd. 5 Advanced Cabinetmaking: Students are in the process of planning lumber down and getting wood ready to glue together. I will be giving a demonstration on gluing along edge grain. Students will learn proper procedures and what to look for when gluing.
Pd. 2,3 Plastics Technology: I will be giving a demonstration on drilling 11/16” hole in each of their blocks and then tapping it with the threading tool.
Tuesday 10/11
Pd. 1,4,7 Basic Wood: I will be giving a demonstration on the Plunge router and using the letter jig to create our next router project. This demo will take most of the period. I want the students to have a full understanding of how the plunge router will be used and how we will be using the letter jigs to create a perfect name plate.
Pd. 5 Advanced Cabinetmaking:
Pd. 2,3 Plastics Technology: Students will continue with drilling and tapping.
WENDNESDAY 10/12
Pd. 1,4,7 Basic Wood: We will be planning lumber down for the plunge router project. This will take the entire period.
Pd. 5 Advanced Cabinetmaking: Students will continue to plane lumber down and glue stock together.
Pd. 2,3 Plastics Technology: Students will continue drilling and tapping. I will be making the threaded plugs for the blocks.
Thursday 10/13
Pd. 1,4,7 Basic Wood: Students will be starting the plunge router project. This project will take approximately three days due to the amount of students in the classes. Students can also use the free hand router if they choose to do extra.
Pd. 5 Advanced Cabinetmaking: Students will continue with projects. Some students will be cutting out parts for projects at this point.
Pd. 2,3 Plastics Technology: Students will continue drilling and tapping. Some will be finishing up by giving their projects a final polish on the wheel.
Friday 10/14 I will not be in school students will have work to do.
Pd. 1,4,7 Basic Wood:
Pd. 5 Advanced Cabinetmaking:
Pd. 2,3 Plastics Technology:
FOR ALL PERIODS:
PA. Standards (Science & Technology); 2.1, 2.2, 2.3, 3.2, 3.4, 3.6
Objectives; Wood shop-To have students fully understand process of how to use different types of measuring devices and how to measure accurately. Students will also learn safe and acceptable procedure for the shop.
Plastics- To have students fully understand process of how to use different types of measuring devices and how to measure accurately. Students will also learn safe and acceptable procedure for the shop.
Assessments; Will be done by Question and Answers and Quiz.
Kevin Scheib (Wood Shop and Plastics Technology) weekly lesson plans (10/10/2011 to 10/14/2011)
Monday 10/10
Pd. 1,4,7 Basic Wood: Students will be finishing the Free Hand routering project. We will also be planeing lumber down For our next router project. This will take the whole period. We will be using Poplar.
Pd. 5 Advanced Cabinetmaking: Students are in the process of planning lumber down and getting wood ready to glue together. I will be giving a demonstration on gluing along edge grain. Students will learn proper procedures and what to look for when gluing.
Pd. 2,3 Plastics Technology: I will be giving a demonstration on drilling 11/16” hole in each of their blocks and then tapping it with the threading tool.
Tuesday 10/11
Pd. 1,4,7 Basic Wood: I will be giving a demonstration on the Plunge router and using the letter jig to create our next router project. This demo will take most of the period. I want the students to have a full understanding of how the plunge router will be used and how we will be using the letter jigs to create a perfect name plate.
Pd. 5 Advanced Cabinetmaking:
Pd. 2,3 Plastics Technology: Students will continue with drilling and tapping.
WENDNESDAY 10/12
Pd. 1,4,7 Basic Wood: We will be planning lumber down for the plunge router project. This will take the entire period.
Pd. 5 Advanced Cabinetmaking: Students will continue to plane lumber down and glue stock together.
Pd. 2,3 Plastics Technology: Students will continue drilling and tapping. I will be making the threaded plugs for the blocks.
Thursday 10/13
Pd. 1,4,7 Basic Wood: Students will be starting the plunge router project. This project will take approximately three days due to the amount of students in the classes. Students can also use the free hand router if they choose to do extra.
Pd. 5 Advanced Cabinetmaking: Students will continue with projects. Some students will be cutting out parts for projects at this point.
Pd. 2,3 Plastics Technology: Students will continue drilling and tapping. Some will be finishing up by giving their projects a final polish on the wheel.
Friday 10/14 I will not be in school students will have work to do.
Pd. 1,4,7 Basic Wood:
Pd. 5 Advanced Cabinetmaking:
Pd. 2,3 Plastics Technology:
FOR ALL PERIODS:
PA. Standards (Science & Technology); 2.1, 2.2, 2.3, 3.2, 3.4, 3.6
Objectives; Wood shop-To have students fully understand process of how to use different types of measuring devices and how to measure accurately. Students will also learn safe and acceptable procedure for the shop.
Plastics- To have students fully understand process of how to use different types of measuring devices and how to measure accurately. Students will also learn safe and acceptable procedure for the shop.
Assessments; Will be done by Question and Answers and Quiz.
Tuesday, October 4, 2011
LESSON PLAN
Kevin Scheib (Wood Shop and Plastics Technology) weekly lesson plans (10/3/2011 to 10/7/2011)
Monday 10/3
Pd. 1,4,7 Basic Wood: We will be starting are first project together. We will be planeing Poplar boards down to ¾”. We will do this together so all students have an opportunity to perform the steps need to run the planer safely under my close super vision. My objective for students is to fully understand how to safely use this machine.
Pd. 5 Advanced Cabinetmaking: Students will be working on finding project plans and having them approved by me. I will be helping students locate project plans on the computer and printing them out.
Pd. 2,3 Plastics Technology: We will be working on cutting the 2” X 4” block apart into two 1 ¾” X 1 ¾” blocks. We will be using the table saw to perform this process. This will take proximity two class periods to cut all of them to size.
Tuesday 10/4
Pd. 1,4,7 Basic Wood: I will be giving a demonstration on using the two different types of router we have in the shop. This will be and in-depth demonstration and will take the entire period. We will use the fixed router and the Plunge router. Students will need to decide what they will be putting on the two boards they will be doing. They may choose from their names or a sports team.
Pd. 5 Advanced Cabinetmaking: I will be lecturing on how to figure out how much would will be used to make their projects and also how much it will cost.
Pd. 2,3 Plastics Technology: We will continue with cutting the blocks to size. I will also give students a demonstration on sanding the blocks on the 12” disc sander. I will give demonstration on sanding using the hand sanders with 100 grit paper.
WENDNESDAY 10/5
Pd. 1,4,7 Basic Wood: Students will first be doing the free hand project. This will take approximately two days to finish the free hand project. I will be supervising each student that is routering at the time.
Pd. 5 Advanced Cabinetmaking: Students will be working on deciding what kind of wood they will be using and figuring out the amount of wood and the cost of the wood before they start to work.
Pd. 2,3 Plastics Technology: Students will continue with Sanding of blocks. They will go through a four step processes of using four different grits.
Thursday 10/6
Pd. 1,4,7 Basic Wood: Students will continue to work on the free hand routering project. Will give a demonstration on sanding the project during the first part of class.
Pd. 5 Advanced Cabinetmaking: Students will be picking out the wood for their projects and will start to plane lumber down.
Pd. 2,3 Plastics Technology: Students will continue to sand blocks down using the sanding steps described in the demonstration
Friday 10/7
Pd. 1,4,7 Basic
Wood: Students will continue with the present work.
Pd. 5 Advanced Cabinetmaking: Students will continue with the present work.
Pd. 2,3 Plastics Technology: Students will continue with the present work.
FOR ALL PERIODS:
PA. Standards (Science & Technology); 2.1, 2.2, 2.3, 3.2, 3.4, 3.6
Objectives; Wood shop-To have students fully understand process of how to use different types of measuring devices and how to measure accurately. Students will also learn safe and acceptable procedure for the shop.
Plastics- To have students fully understand process of how to use different types of measuring devices and how to measure accurately. Students will also learn safe and acceptable procedure for the shop.
Assessments; Will be done by Question and Answers and Quiz.
Kevin Scheib (Wood Shop and Plastics Technology) weekly lesson plans (10/3/2011 to 10/7/2011)
Monday 10/3
Pd. 1,4,7 Basic Wood: We will be starting are first project together. We will be planeing Poplar boards down to ¾”. We will do this together so all students have an opportunity to perform the steps need to run the planer safely under my close super vision. My objective for students is to fully understand how to safely use this machine.
Pd. 5 Advanced Cabinetmaking: Students will be working on finding project plans and having them approved by me. I will be helping students locate project plans on the computer and printing them out.
Pd. 2,3 Plastics Technology: We will be working on cutting the 2” X 4” block apart into two 1 ¾” X 1 ¾” blocks. We will be using the table saw to perform this process. This will take proximity two class periods to cut all of them to size.
Tuesday 10/4
Pd. 1,4,7 Basic Wood: I will be giving a demonstration on using the two different types of router we have in the shop. This will be and in-depth demonstration and will take the entire period. We will use the fixed router and the Plunge router. Students will need to decide what they will be putting on the two boards they will be doing. They may choose from their names or a sports team.
Pd. 5 Advanced Cabinetmaking: I will be lecturing on how to figure out how much would will be used to make their projects and also how much it will cost.
Pd. 2,3 Plastics Technology: We will continue with cutting the blocks to size. I will also give students a demonstration on sanding the blocks on the 12” disc sander. I will give demonstration on sanding using the hand sanders with 100 grit paper.
WENDNESDAY 10/5
Pd. 1,4,7 Basic Wood: Students will first be doing the free hand project. This will take approximately two days to finish the free hand project. I will be supervising each student that is routering at the time.
Pd. 5 Advanced Cabinetmaking: Students will be working on deciding what kind of wood they will be using and figuring out the amount of wood and the cost of the wood before they start to work.
Pd. 2,3 Plastics Technology: Students will continue with Sanding of blocks. They will go through a four step processes of using four different grits.
Thursday 10/6
Pd. 1,4,7 Basic Wood: Students will continue to work on the free hand routering project. Will give a demonstration on sanding the project during the first part of class.
Pd. 5 Advanced Cabinetmaking: Students will be picking out the wood for their projects and will start to plane lumber down.
Pd. 2,3 Plastics Technology: Students will continue to sand blocks down using the sanding steps described in the demonstration
Friday 10/7
Pd. 1,4,7 Basic
Wood: Students will continue with the present work.
Pd. 5 Advanced Cabinetmaking: Students will continue with the present work.
Pd. 2,3 Plastics Technology: Students will continue with the present work.
FOR ALL PERIODS:
PA. Standards (Science & Technology); 2.1, 2.2, 2.3, 3.2, 3.4, 3.6
Objectives; Wood shop-To have students fully understand process of how to use different types of measuring devices and how to measure accurately. Students will also learn safe and acceptable procedure for the shop.
Plastics- To have students fully understand process of how to use different types of measuring devices and how to measure accurately. Students will also learn safe and acceptable procedure for the shop.
Assessments; Will be done by Question and Answers and Quiz.
Subscribe to:
Posts (Atom)